EUROCAE/ED-14 | Environmental Conditions and Test Procedures for Airborne Equipment |
IEC62368-1 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
RTCA DO-160 - Section 22 | Environmental Conditions and Test Procedures for Airborne Equipment |
RTCA DO-160 - Section 17 | Environmental Conditions and Test Procedures for Airborne Equipment |
IEC 60747-5-5 | Semiconductor insulation |
Airbus ABD0100-1-2 | Different manufacturer standards related to indirect lightning test |
RTCA DO-160 - Section 25 | Environmental Conditions and Test Procedures for Airborne Equipment |
RTCA DO-160 - Section 19 | Environmental Conditions and Test Procedures for Airborne Equipment |
Boeing D6-16050 | Different manufacturer standards related to indirect lightning test |
ANSI/IEEE C37.90 | Relays and Relay Systems Associated with Electric Power Apparatus |
UL 1414 | Capacitors and Suppressors for Radio- and Television-Type Appliances |
ANSI/IEEE C62.45 | Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits |
ANSI / IEEE C62.31 | ANSI / IEEE C62.31 |
ANSI C62.41 | |
SAE J551-15 | SAE J551-15 |
SAE ARP 5416 | SAE ARP 5416 |
SAE AS 5958 | SAE AS 5958 |
Airbus ABD0100-1-8 | |
SAE AIR 6185 | SAE AIR 6185 |
SAE ARP 6205 | |
IEC 61009-1 | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
IEC 60747-17 | Semiconductor insulation |
IEC 62052-11 | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment |
IEC 61051-2 | |
IEC 60060-1 | High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 61851-21-2 | Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems |
IEC 60384-14 | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
IEC 60947-1 | Low-voltage switchgear and controlgear - Part 1: General rules |
IEC 62475 | IEC 62475 |
IEC 61730-2 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
IEC 60255-26 | Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
IEC 61643-11 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
IEC 61643-11 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
IEC 61000-6-1 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
EN 50470-1 | Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
IEC 61340-3-1 | Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
IEC 60065 | Audio, video and similar electronic apparatus - Safety requirements |
EN 50155 | Railway applications. Rolling stock. Electronic equipment |
EN 61543 | Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
EN 50121-3-2 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
IEC 60747-5 | Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers |
IEC 61010-1 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
IEC 60335 | |
IEC 60099-4 | |
IEC 61008-1 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
IEC 61980-1 | Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements |
IEC 60571 | Railway applications - Electronic equipment used on rolling stock |
IEC 62771-1 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 61851-22 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
IEC 60255-27 | Measuring relays and protection equipment - Part 27: Product safety requirements |
IEC 61051-1 | Varistors for use in electronic equipment - Part 1: Generic specification |
IEC 61643-1 | |
IEC 60384-1 | IEC 60384-1 |
IEC 61730-1 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
IEC 61000-6-2 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
IEC 62305-4 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
IEC 61439-1 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
IEC 61180 | High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment |
IEC 61051-1 | Varistors for use in electronic equipment - Part 1: Generic specification |
IEC 60950-1 | Information technology equipment - Safety - Part 1: General requirements |
EN 50121-4 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
IEC 60945 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
IEC 60664-1 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60601-1-2 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
IEC 61000-4-9 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
IEC 61000-4-5 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
IEC 61000-4-2 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-29 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
IEC 61000-4-18 | Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
IEC 61000-4-12 | Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
IEC 61000-4-10 | Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
IEC 61000-4-8 | Electromagnetic compatibility (EMC) |
IEC 61000-4-4 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques |
IEC 61000-4-34 | Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
IEC 61000-4-19 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
IEC 61000-4-16 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
IEC 61000-4-11 | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
JASO D902-95 | Durability testing methods for automotive electronic equipment |
SAE J551-15 | Vehicle Electromagnetic Immunity |
UN ECE R10 | Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility |
JASO D001-94 | General Rules of Environmental Testing Methods for Automotive Electronic Equipment |
ISO 10605 | Road vehicles |
ITU-T K.12 | ITU-T K.12 |
ITU-T K.44 | Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents - Basic Recommendation |
ITU-T K.20 | Resistibility of telecommunication equipment installed in a telecommunication centre to overvoltages and overcurrents |
ITU-T K.99 | ITU-T K.99 |
ITU-T K.45 | Resistibility of telecommunication equipment installed in the access and trunk networks to overvoltages and overcurrents |
ITU-T K.21 | Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents |
MIL-STD-461 / CS06 | |
MIL-STD-461 / CS118 | MIL-STD-461 / CS118 |
MIL-1275B | Characteristics of 28 V DC Electrical Systems in Military Vehicles |
MIL-STD-461 / CS106 | CS106, conducted susceptibility, transients, power leads |
MIL-STD-461 / CS116 | |
MIL-STD-331 | Fuse and fuse components |
STANAG 4239 | Electrostatic Discharge Test procedures |
MIL-STD-464 | MIL-STD-464 |
MIL-STD-461 / CS115 | |
MIL-STD-461 / CS117 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
CISPR 35 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
VW TL 824-66 | Automotive Electrostatic Discharge (ESD) |
JESD22-A114-A | JESD22-A114-A |
DC 10614 | Automotive Electrostatic Discharge (ESD) |
JESD22-A114-B | JESD22-A114-B |